Belkin Mouse F8E874 User Manual

INTRODUCTION  
HARDWARE INSTALLATION  
1. Make sure your computer is turned on  
before installing the Mouse.  
2. Connect the receiver into an available  
USB port on your PC. (Fig. 3)  
MiniWireless  
Optical Mouse  
Congratulations and thank you for  
purchasing the MiniWireless Optical Mouse  
from Belkin. You are about to experience  
a whole new world of computing  
convenience with superior input features  
and navigating accuracy. The MiniWireless  
Optical Mouse provides a great radio  
frequency (RF) wireless input solution for  
the mobile professional.  
Navigate your notebook computer with  
optical precision and wireless freedom  
Fig. 3  
SYSTEM REQUIREMENTS  
PC 486 or higher  
Windows® 98 SE, Me, 2000, XP  
USB port  
3. Your PC should automatically find new  
hardware and install necessary drivers.  
Note: Windows 98 SE may require you to  
insert your Windows 98 SE Installation  
CD into your computer’s CD-ROM drive to  
complete the install.  
4. Switch on the power of the Wireless  
Mouse located on the backside of the  
Mouse. The Mouse syncs with the  
receiver automatically. (Fig. 4)  
CD-ROM drive  
PACKAGE INCLUDES  
MiniWireless Optical Mouse  
USB Receiver  
User Manual  
2 AAA Batteries  
OVERVIEW  
Before starting the installation of the  
hardware for the Mouse, please remove any  
drivers or software from any mice that were  
previously installed on your computer. This is  
to avoid any conflicts they may create, which  
could result in an improper installation of  
your Mouse. Please consult the documents  
that came with your previous mouse for  
proper instructions on how to uninstall the  
software and drivers.  
F8E874  
P74749-A  
User Manual  
Fig. 4  
Note: Each time you repeat this step, the  
Mouse randomly selects a new ID. This  
allows multiple wireless mice to work in  
the same location without cross talk. If  
you experience cross talk with another  
wireless mouse, repeat the synchronizing  
steps to change the channel.  
Note: If the Mouse does not sync with  
the receiver automatically, please see  
the section entitled “Synchronizing your  
Mouse to your Receiver”, below.  
Note: While traveling, please switch off  
the unit to save battery power.  
MOUSE SETUP  
1. Remove the top cover of your Mouse by  
pressing and holding the bottom release  
tab. (Fig. 1)  
SYNCHRONIZING YOUR MOUSE TO  
YOUR RECEIVER  
SETUP FOR MULTIPLE USERS  
When using more than one MiniWireless  
Optical Mouse in the same location, set up  
one Mouse at a time. You must complete the  
setup for each Mouse before beginning to  
set up the next Mouse.  
If the Mouse does not automatically sync  
with the receiver, press the connect button  
on the top of the receiver. The light on the  
receiver will blink rapidly. Then sync the  
Mouse to the receiver by pushing the sync  
button on the bottom of the Mouse. The  
light on the receiver will stop blinking and  
light brightly. (Fig. 5)  
Fig. 1  
ENVIRONMENT  
2. Insert 2 AAA batteries. (Fig. 2)  
To avoid environment interference, which  
will shorten the effective operation distance,  
please note the following:  
1. Do not put the Mouse and receiver on  
a metal cabinet or desk. Metal creates  
RF interference, which may impair the  
RF communication and shorten the  
communication distance.  
2. Keep a distance of more than 4.9 feet  
(1.5m) between your Mouse and  
Fig. 2  
3. Replace the top cover and close.  
Note: Be sure to check polarity (+ or  
– sign) and insert battery properly.  
Fig. 5  
 

Black Box Server EME144A R2 User Manual
Black Decker Drill DR220G User Manual
Black Decker Saw BPSC2135 User Manual
Bloomfield Coffeemaker 8773 User Manual
Breville Fryer BDF300 User Manual
Califone Headphones 1216USB 6 User Manual
CarAlarmscom Handheld Game System 404D User Manual
Carson Stereo Amplifier SA 500 27 User Manual
Casio Calculator ClassPad OS Version 303 User Manual
Chicago Electric Grinder 69454 User Manual